Introduction
As a musician for 22 years, I have always been involved in audio projects and building audio equipment. In 2001, I started to build my studio, which I called Bluetrack.
I decided to split the studio into two parts: one, high-tech and the other, old-school. The older part would use vintage equipment, and I found several types of amps, pre-amps, compressors etc with unique and stylish designs. The kit was ful of analogue gauges and tube based circuits. I'm happy to keep this stuff alive!
I won a Coolermaster Cavalier case in a modding contest back in 2004, and it was my incentive to create a mod that would be a good bridge in my studio - a retro case mod that could represent the spirit of the vintage style, whilst housing cutting edge technological equipment.
Silent ContexYZ is the result of this goal. I hope you enjoy reading about it!
Creating the Window
The first thing was to create a window for the side of the case. I wanted to cut an intricate side panel design.
I made two designs for the window, in 1:1 scale using Corel Draw. The first was a simpler design and the second was more detailed. I ended up choosing the second.
I used Corel to mark where I would use a drill to make the necessary holes to start cutting. I then sent this file to a graphics company, which cut the design into a sheet of vinyl that I could overlay on my case panel.
I cut a 3mm plate of MDF with the exact dimensions of the side panel, and I put this on top of the panel and used it as a guide for the cuts I was going to make, since I didn't want to cut directly onto the side panel. I also placed a 9mm MDF sheet below the side panel as a sturdy base.
You can see how I used the holesaw to start off my panel design. The holesaw cuts through the vinyl guide, through the MDF cover and into the panel, through down to the MDF base.
I must say thanks to my friend Marcelo Tchoboys and his dad, not only for the use of their drill press, but for taking some pictures for me too!
Want to comment? Please log in.