Biomech 550 case by Wolverine

Written by Wil Harris

June 12, 2006 | 12:45

Tags: #art #case #magnus-persson #project #wolverine

Companies: #mod

The TFT

Biomech 550 case by Wolverine The TFT Biomech 550 case by Wolverine The TFT
Now on to this project's real eye catcher: the front.

I wanted to use a reasonably large display in the front of the case - I found a 7" TFT display that fit the bill perfectly: it has a 1024x768 resolution and is remote controlled. I was hoping that the screen would just slide right into the drive bay, but unfortunately it didn't - there were a few millimetres on each side that had to be trimmed away to allow for it to slide away. After some grinding with the dremel, the screen was a perfect fit inside the drive bay.

Biomech 550 case by Wolverine The TFT Biomech 550 case by Wolverine The TFT Biomech 550 case by Wolverine The TFT
With the screen in place, it was time to add one feature that would really catch the eye. I managed to get hold of an old German gas mask - this and my chosen case were almost a match made in heaven. As before, to make it Giger-style I had to apply even more putty - this was then moulded and dremelled in the same way that I did the side panels.

Biomech 550 case by Wolverine The TFT Biomech 550 case by Wolverine The TFT
After about 15 hours of dremel work the front of the case was ready for a layer of undercoat. At last, I was able to test the TFT screen with the front all painted and mounted.
Discuss this in the forums
YouTube logo
MSI MPG Velox 100R Chassis Review

October 14 2021 | 15:04