The next stage was to install the water-cooling parts, the first of which was the BIX² radiator. (Black Ice II).


Blackmesa II Part 1 Watercooling: Radiator
The radiator was to be fitted to the cases top plate. Domed nuts were fitted to the top plate.


Blackmesa II Part 1 Watercooling: Radiator
The two large holes are for the radiator fans and the small one is to be a gland plate for the wires to the fans.


Blackmesa II Part 1 Watercooling: Radiator Blackmesa II Part 1 Watercooling: Radiator
Detail of the gland plate showing the domed nuts mounted on rubber washers.


Blackmesa II Part 1 Watercooling: Radiator
Flexible conduit and its retaining bracket were fitted and sprayed dark grey.


Blackmesa II Part 1 Watercooling: Radiator
The radiator was fitted and the fan wires will be run through the plastic flexible conduit.


Blackmesa II Part 1 Watercooling: Radiator
The underside.


Blackmesa II Part 1 Watercooling: Radiator
Completed top view.


The radiator needed to be aged to match the rest of the case. It also needed some more colour to bring it to life so I painted logos with yellow colour paint and I made two logo with decals that gave a better look to the fan grill.


Blackmesa II Part 1 Watercooling: Radiator

Blackmesa II Part 1 Watercooling: Radiator Blackmesa II Part 1 Watercooling: Radiator
Discuss this in the forums
YouTube logo
MSI MPG Velox 100R Chassis Review

October 14 2021 | 15:04