Side-Panel
To add a bit of interest to the right-hand side, and to compliment other parts of the case yet to be seen, I fabricated a neon plexi panel.
Cut with a hacksaw, filed drilled and sanded...
...and fitted to the inside. I did this without removing the PSU or any of the case internals so it was a bit awkward to get the dome nuts over the ends of the screws. It took double-sided tape, Blu-tack, a metal ruler, a bit driver, masking tape and a half hour of sweaty hand contortions. Still beat trying to take the PSU out though!
The socket head cap screws match all the others I have used (and are still to use) on the case exterior. Polished and with stainless steel washers, of course.
To add a bit of interest to the right-hand side, and to compliment other parts of the case yet to be seen, I fabricated a neon plexi panel.
Cut with a hacksaw, filed drilled and sanded...
...and fitted to the inside. I did this without removing the PSU or any of the case internals so it was a bit awkward to get the dome nuts over the ends of the screws. It took double-sided tape, Blu-tack, a metal ruler, a bit driver, masking tape and a half hour of sweaty hand contortions. Still beat trying to take the PSU out though!
The socket head cap screws match all the others I have used (and are still to use) on the case exterior. Polished and with stainless steel washers, of course.
MSI MPG Velox 100R Chassis Review
October 14 2021 | 15:04
Want to comment? Please log in.