Here are a few images of the finished cases:
With the cases skinned up in camouflage all that remained was to have them installed with some hardware and sent off ready for the competition.
The cases were installed with the following components:
<ul><li>Abit IC7</li><li>P4 3.0 Prescott 1MB L2 cache</li><li>1GB Geil golden dragon PC3200</li><li>Antec Truepower 430W PSU</li><li>Connect 3D 9800 Pro 128Mb</li><li>1x 200Gb Maxtor SATA 150 HDD</li><li>Sony 8x DVD-RW silver</li><li>Silver floppy disk drive</li></ul>
To win yourself a Vietcong Ratpadz skin (see below) send me an email and you will be entered into a draw for one of three skins. Entries must be recieved by the 1st August 2004.
Our thanks go to polyGFX.com for their support with this project, it couldn't have been done without them, and good luck to all who enter the competition.
[center]
With the cases skinned up in camouflage all that remained was to have them installed with some hardware and sent off ready for the competition.
The cases were installed with the following components:
<ul><li>Abit IC7</li><li>P4 3.0 Prescott 1MB L2 cache</li><li>1GB Geil golden dragon PC3200</li><li>Antec Truepower 430W PSU</li><li>Connect 3D 9800 Pro 128Mb</li><li>1x 200Gb Maxtor SATA 150 HDD</li><li>Sony 8x DVD-RW silver</li><li>Silver floppy disk drive</li></ul>
To win yourself a Vietcong Ratpadz skin (see below) send me an email and you will be entered into a draw for one of three skins. Entries must be recieved by the 1st August 2004.
Our thanks go to polyGFX.com for their support with this project, it couldn't have been done without them, and good luck to all who enter the competition.
[center]
MSI MPG Velox 100R Chassis Review
October 14 2021 | 15:04
Want to comment? Please log in.