Cold Fusion by SleepStreamer

Working the top

I learned the hard way not to try to use a Dremel to cut out large areas of steel - it takes forever! You will get things done far quicker with an angle grinder, take it from me. I cut the appropriate size plexi using a jigsaw, and then cut a fan hole in the middle using a holesaw.


I used rivets to layer the laser-cut panel on top of the acrylic on top of the steel.


Here's what it looks like mounted out.

The right hand panel

Out comes the Autosol for a glorious rubbed-down gleaming finish.


Once again, I used an angle grinder to engrave the side with a logo I designed.